Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Adding new disk

Analyst
Trusted Contributor

Adding new disk

I would like to add a new disk on the existing vg for production and BCV using XP array LDEV on hpux box
. Please help me
2 REPLIES
Jorge Pons
Trusted Contributor

Re: Adding new disk

Hi

Where do you need help? at XP or HPUX?

Regards, Jorge
Amar_Joshi
Honored Contributor

Re: Adding new disk

You need to provision new LUN from XP to HPUX. Then look for this thread to achieve the volumegroup extension
http://h30499.www3.hp.com/t5/System-Administration/Add-a-disk-to-vg-and-increase-lv-in-a-2-node-Service-guard/m-p/4096009#M311084


Create the first mirror sync between primary volume and secondary volume. I prefer to do it from the CommandViewXP but it can also be done through RAIDManager command (find someone who understand RAIDManager otherwise you may reverse sync in error).

Finaly have the new volume added to the /etc/horcmxx.conf (xx is the number of your horcm service). You need to specifically put it under HORCM_DEV section.