Disk Enclosures
1748015 Members
4312 Online
108757 Solutions
New Discussion юеВ

Re: Adding users in Command View 6.0

 
SOLVED
Go to solution
Stuart Powell
Super Advisor

Adding users in Command View 6.0

I have two EVA4000 arrays managed by an appliance server running CommandView 6.0. I would like to know how to add another user to CommandView. I have an intern whom I would like to be able to review the arrays configuration to input into the documentation we maintain.

Any input would be appreciated.

Stuart
Sometimes the best answer is another question
5 REPLIES 5
Rob Leadbeater
Honored Contributor

Re: Adding users in Command View 6.0

Hi Stuart,

In CV EVA 6, user administration is based on Windows authentication.

Therefore to add a new user, you need to create a new user in Windows, then add that user to the Storage Users and/or Storage Admin group on the SMA.

Hope this helps,

Regards,

Rob

Uwe Zessin
Honored Contributor
Solution

Re: Adding users in Command View 6.0

The group names begin with "HP ", but I think you would have found it yourself. The "HP Storage Users" group provides read-only access.
.
Stuart Powell
Super Advisor

Re: Adding users in Command View 6.0

Uwe & Rob;

Thanks for the input. Is the HP Storage group already created, or does it need to be created to add users.

I will pass this information on to our Windows Admin, so he can build the user.

Stuart
Sometimes the best answer is another question
Uwe Zessin
Honored Contributor

Re: Adding users in Command View 6.0

The groups are added by the Command View EVA installer. Usually, those are local groups on the system where CV-EVA is installed.
.
Alzhy
Honored Contributor

Re: Adding users in Command View 6.0

We're running 9.2.

And there seeems to be no local Groups Created.

According to the fellah that installed CV 9.2, he simply picked a particular group in the domain the CV server is on. We need to add another user but there is no local HP Group.

Anyting changed in CV 9.2?
Hakuna Matata.