Array 641 Error on POST

[lee_72]

Have a Proliant ML370/w2k3sp1 w/ a 641 array controller. The HD was replaced under warranty. All drive lights are green. However on reboot get a POST ERROR: 1786-Drive Array Recovery NEeded. The ACU shows "Ready for Rebuild." ADU shows about the same. Have attached the ADU report. Applied latest drivers/firmware with no resolution. The server is located where there is currently no phone, so am posting this.
Thanks.
Lee

[Sameer_Nirmal]

Hi,

As per the ADU data, the disk (SCSI Port 1, Drive ID 0) is giving read error. The same drive is supposed to be included in the logical drive 1 but failed. Thats why you see the POST message & ACU shows '"Ready for Rebuild".

You need to log a h/w call to HP, provide them all this data & get it replaced.

[DannyB]

Wasn't there an F1 to rebuild message?