Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Array Configuration Utility

Ayman Altounji
Valued Contributor

Array Configuration Utility

I have a 3200 Array controller installed and configured in a Proliant 3000 Windows 2000 box. The disk array controller has been setup and configured correctly through smart start 4.90. The problem is when I try to view the configuration of the array controller through the Array Configuration Utility in Windows 2000 - it starts up and says "detecting array controllers" and just sits at this screen and goes no further. The windows 2000 box has the picked up the 3200 under SCSI Devices and Raid Controllers in Device Manager. I have downloaded the latest RAID Array drivers from COMPAQ's site and also the latest version of the Array configuration utility (2.50.66), but the same behaviour occurs. Any ideas?
2 REPLIES
Ayman Altounji
Valued Contributor

Re: Array Configuration Utility

Did you install our Win2K SupportPaq (driver kit) before the ACU or at the same time? (Basically - are you using our drivers or Microsoft's?)
Ayman Altounji
Valued Contributor

Re: Array Configuration Utility

Upgrade BIOS the Server and firmware for this controller.
New firmware for this controller located in SP12985
In case of the BIOS verify version.
If Version of the BIOS P09 SP15904
If Version of the BIOS E39 SP14127