Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Array Controller Utility

Jorge Rivera_3
Occasional Contributor

Array Controller Utility

i need to know where i can find the array controller utility for my proliant 1000 , i don't have a SmartStart CD , i need to configure the array controller because i using the compaq erase utility and all configuration has been deleted thanks for all your help.
6 REPLIES
Michael Steele_2
Honored Contributor

Re: Array Controller Utility

Try this link: "array configuration utility xe"

http://h18000.www1.hp.com/products/servers/proliantstorage/software-management/acumatrix/index.html
Support Fatherhood - Stop Family Law
Roy Main
Valued Contributor

Re: Array Controller Utility

you need to use sysconfig. if you dont have a system partition, download the sysconfig diskettes.
Jorge Rivera_3
Occasional Contributor

Re: Array Controller Utility

This array configuration utility is for windows nt or 2000 server installed in the server , my problem is i can't make a system partitions because my array controller is not configured , i need to know the software in diskette to configure the array controller.
Jorge Rivera_3
Occasional Contributor

Re: Array Controller Utility

Roy:

can you bring me the link to download the system sys diskette ? I erase all configuration using the compaq erase utility in my proliant 1000, the first step i take i boot up the compaq configuration utility, the software detect all eisa boards including the smart-2 scsi controller and array controller , but i need to configure the array controller on compaq configuration utility because on windows installation can't detect any logical drive or system partition, thanks for all
Roy Main
Valued Contributor

Re: Array Controller Utility

You can use the configuration diskettes you already have.

Edit the configuration and highlight the smart array controller. then, you can configure it.

Re: Array Controller Utility

Hey Guys,

Download sp6263 from: ftp://ftp.compaq.com/pub/softpaq/sp6001-6500/6263.exe

This softpaq, creates 2 disks, 1st is bootable.

Bootup from the 1st disk, and after inserting the 2nd, you will see the arrary configuration utility for dos coming up !!!

Enjoy,

Sharon
Leader in HP/Compaq Technologies