Disk Enclosures
1745817 Members
4377 Online
108722 Solutions
New Discussion юеВ

Re: Array will not rebuild.

 
Grumpy_2
New Member

Array will not rebuild.

Have ML 530 server with 5300 controller. Has 3 logical drives. Problem is on drive 3. Had 2 drives start to fail. I replaced one in Port 2 Drive ID 2 and it rebuilt no problem. I then replaced Port 2 Drive ID 1 with a new drive but it never completes rebuilding. Ran ADU and found that Port 2 drive ID 1 was not stamped, so I use SmartStart 7 cd to fix that, but still have trouble rebuilding. All firmware on drives are updated. I have attach the adu report. Thanks!
2 REPLIES 2
skt_skt
Honored Contributor

Re: Array will not rebuild.

did the second drive really start rebuilding?
Grumpy_2
New Member

Re: Array will not rebuild.

Yes second drive starts to rebuild and gets a little over half way done and the stops. Then status shows and queued again.