Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Array will not rebuild.

Grumpy_2
Occasional Visitor

Array will not rebuild.

Have ML 530 server with 5300 controller. Has 3 logical drives. Problem is on drive 3. Had 2 drives start to fail. I replaced one in Port 2 Drive ID 2 and it rebuilt no problem. I then replaced Port 2 Drive ID 1 with a new drive but it never completes rebuilding. Ran ADU and found that Port 2 drive ID 1 was not stamped, so I use SmartStart 7 cd to fix that, but still have trouble rebuilding. All firmware on drives are updated. I have attach the adu report. Thanks!
2 REPLIES
skt_skt
Honored Contributor

Re: Array will not rebuild.

did the second drive really start rebuilding?
Grumpy_2
Occasional Visitor

Re: Array will not rebuild.

Yes second drive starts to rebuild and gets a little over half way done and the stops. Then status shows and queued again.