AutoRAID 12H questions

[Mark Jones_1]

Simple question (or so I thought):
How can I find out what speed of disks are in a 12H? Very old disks were 7200rpm and later disks were 10000rpm (I believe). Without taking the disks out, how can I tell what they are?

[Patrick Wallek]

You might try doing an 'arraydsp -a ' (where is your array id number) and see if it lists a part number for the disks. If it does, you could then try to cross-reference that number via http://partsurfer.hp.com

[Mahesh Kumar Malik]

Hi Mark

I believe speed of each Hard disk module is printed on it front bezel and thus visible along with capacity. Speed may be printed as 7.2K or 10K. You will have to open front door of 12H

Regards
Mahesh