HPE Community
Disk Enclosures
1753814 Members
7903 Online
108805 Solutions
New Discussion

AutoRaid failed when upgrade firmware for controller

 
Hoang Minh Tuan
Regular Advisor

‎02-06-2005 08:30 PM

‎02-06-2005 08:30 PM

AutoRaid failed when upgrade firmware for controller

Hi all,

I have just replaced a new controller for AutoRaid 12H but it doesn't miss match so that I have to upgrade firmware. After completing firmware upgrade to HP56, the AutoRaid have a problem displaying in LCD of AutoRaid:"No Quorum" only 6 disks of 10 disks included.
But 4 other disks is not really be failed because it change to good status when unplugging a good disk.

I attacked log file for more information

Thanks in advaced
HMT

Bus wait at bus station, Work wait at my work station
0 Kudos
Reply
1 REPLY 1
Mark Nieuwboer
Esteemed Contributor

‎02-07-2005 12:45 AM

‎02-07-2005 12:45 AM

Re: AutoRaid failed when upgrade firmware for controller

Hi,

Most of the time it is the firmware of the disks. i saw same differents in firmware level.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.