Autopath - Load Balancing

[Mohamed Saleem_1]

Hi Folks..

For some reason in my HP UX server, the load balancing policy ( RR ) set in the server has changed back to " none ". Following change was done after the load balancing policy was set. Is that because of any one of these..?

1. EVA Firmware upgraded to XCS 6.220
2. HBA F/w upgraded in hp ux server
3. Current Securepath version in HP Ux is "HPswsp Version : A.3.0F.00F.00F"

Please let me know..

Thanks,
Saleem

[Jeff_Traigle]

Your version of Secure Path could be the problem, especially with the EVA XCS and HBA firmware upgrades. (Is you're switch firmware current also?) Current version is:

HPswsp A.3.0F.04F.01F HP StorageWorks Secure Pa
th Device Driver and utilities for Active-Active Disk Arrays

You've basically applied no service packs or patches since the initial release. Always the potential for really weird things happening when you don't stay up-to-date.

Download latest from:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=1825336&prodTypeId=18964&prodSeriesId=471465&swLang=13&taskId=135&swEnvOID=7