BC 2.3 job fails

[Herr Gottfried HOELD]

Hi there,

We are running BC 2.2 on our EVA 5000, we have a snapshot job which runs within a script. All works fine.

Ever since we have upgraded BC to 2.3 (build 86, by HP engineer) our job fails, the output is as follows:

BC_Job: Snap_SAPDBNPE
undostatus_failed
dostatus_OK
Drive_Status____
0_retry
......................................................................
...................... backup script ............................
Start of Job: ---02.02.2005-23.00
start undo last job
[evmcl] 2005/02/02 23:00:12: Job: Snap_SAPDBNPE, Request (getJobStatusMore) is complete., Status: Failed
jobName Snap_SAPDBNPE
owner BACKSRV
stateDate 2005/02/02 23:00:02
state Failed
validity
opState Unknown operation in job
step 4
jobPctCompl 25
stepPctCompl 100

Start Failed undo job again
start undo last job
[evmcl] 2005/02/03 01:46:18: ERROR - Could not connect to BC.
start do job
[evmcl] 2005/02/03 01:46:19: Cannot run job, state<17> date<2005/02/03 01:40:48>
[evmcl] 2005/02/03 01:46:19: Job is not in the correct state for this operation
Drive \\sapnpt1\P$ NOT Mounted - Job FAIL !!!
End of Job: ---03.02.2005-01.46

The servers are both running W2003

Thanx for your help
Gottfried Hoeld