HPE Community
Disk Enclosures
1753500 Members
4548 Online
108794 Solutions
New Discussion

Battery Backed Write Cache module installed but battery count is still zero

 
ewc
New Member

‎10-22-2009 08:53 AM

‎10-22-2009 08:53 AM

Battery Backed Write Cache module installed but battery count is still zero

We have an HP ProLiant DL360 G5 server with a p400i raid controller and after noticing the poor write performance we purchased a BBWC module and installed it.

For some reason the raid array configuration utility still shows a battery count of 0.

During POST the machine says that the module is present though.

One way or the other, I still cannot adjust the read/write cache ratio. Is there something we need to do to turn the module on or activate it somehow?

Thanks in advance for your help.
0 Kudos
Reply
1 REPLY 1
je_1
New Member

‎11-17-2009 06:03 PM

‎11-17-2009 06:03 PM

Re: Battery Backed Write Cache module installed but battery count is still zero

i am having the same problem with my HP Proliant DL360 G5.
Battery count value still zero (0).
Did you resolve this issue?

Best Regards,
Je
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.