HPE Community
Disk Enclosures
1752612 Members
4171 Online
108788 Solutions
New Discussion юеВ

Re: Battery charge low..

 
Ayman Altounji
Valued Contributor

тАО03-12-2001 04:00 PM

тАО03-12-2001 04:00 PM

Battery charge low..

I am installing the 5300 in a ML530 and am receiving a message - 1794 - Slot 2 Drive Array Accelerator Battery Charge low. It goes on to say that the array is disabled and will be re-enabled when the charge gets to full. My question is how long should I have to wait until the charge gets to full, since I don't want to put in a warranty call if I just have to wait for the battery to charge.
0 Kudos
Reply
2 REPLIES 2
Ayman Altounji
Valued Contributor

тАО03-18-2001 04:00 PM

тАО03-18-2001 04:00 PM

Re: Battery charge low..

Leave it running for 72 hours to be sure...
0 Kudos
Reply
Ayman Altounji
Valued Contributor

тАО10-20-2001 04:00 PM

тАО10-20-2001 04:00 PM

Re: Battery charge low..

Hi, I got the same condition as Hhinz.
I've been waited for more than 72 power-on hours recommended by Compaq. But the same message is displayed. The User Guide from Compaq say that we have to wait more than 36 hours for battery recharge. what's wrong. Do I have to replace the battery only, Array Accelerator, or Controller itself? Thank you. Have a nice day!
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.