Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Bootable raid0 with Smart Array 5300

Puppetfreek
Occasional Contributor

Bootable raid0 with Smart Array 5300

Hi (again!),

I know that coz my system isn't a Proliant all thing doesn't work as it should.

When you add a new array from the bios-meny (when you have pressed F8 during boot-up), you can choose from different kinds of raid etc. One of the choices avaible there is "Maximum Boot Partition" which I guess makes my drive bootable. The you can choose from:

Bios disable (4gb) (default)
Bios enable (8gb)

The problem i'm encounting is that I can't use tab, coz then my system freezes, so, i'm wondering if there is another way of doing this?

Best regards,
Mathias