Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

CA EVA has not have READ ONLY option! pls help

SOLVED
Go to solution
Nguyen Anh Tien
Honored Contributor

CA EVA has not have READ ONLY option! pls help

I am having one customer using MetroCluster with CA EVA4k. Connection is as figure in attached file
We havenâ t configure zoning for 04 SAN switch.
Problem is: On WMS server (Command view EVA) I am only able to set Destination host access: to NONE or Present ONLY. (READ ONLY is not available to choice).
Pls help me to find the reason?
Some information about softwares:
Command View EVA version 6.0
Controller FW: CR0EB0xc3p-6100
Regards
Tien
HP is simple
4 REPLIES
Nguyen Anh Tien
Honored Contributor

Re: CA EVA has not have READ ONLY option! pls help

FURTHER OUTPUT FOR DIAGNOSTIC
=====
EVA4K-SEC-15> set DR_GROUP "\Data Replication\DrgA" accessmode=readonly

Error: Error cannot modify object properties. [Invalid DR mode]
EVA4K-SEC-15> set DR_GROUP "\Data Replication\DrgA" accessmode=?

The options are:
PRESENTONLY
READONLY
DISABLE
EVA4K-SEC-15> set DR_GROUP "\Data Replication\DrgA" accessmode=READONLT
^
Error: Syntax error at or near here
EVA4K-SEC-15> set DR_GROUP "\Data Replication\DrgA" accessmode=READONLY

Error: Error cannot modify object properties. [Invalid DR mode]
EVA4K-SEC-15> set DR_GROUP "\Data Replication\DrgA" accessmode=DISABLE

EVA4K-SEC-15> set DR_GROUP "\Data Replication\DrgA" accessmode=PRESENTONLY

Error: Error cannot modify object properties. [Invalid DR mode]
EVA4K-SEC-15> set DR_GROUP "\Data Replication\DrgA" accessmode=PRESENTONLY

This command has no additional keywords or parameters
EVA4K-SEC-15> set DR_GROUP "\Data Replication\DrgA" accessmode=DISABLE ?

This command has no additional keywords or parameters
EVA4K-SEC-15> set DR_GROUP "\Data Replication\DrgA" accessmode=PRESENTONLY

Error: Error cannot modify object properties. [Invalid DR mode]

??????? WHY WHY WHY ??? PLS HELP????????
POINTS WILL BE ASSIGNED ACCORDINGLY
HP is simple
Sameer_Nirmal
Honored Contributor
Solution

Re: CA EVA has not have READ ONLY option! pls help

The SSSU command it needs to be executed against the storage cell that holds the source Vdisk of the DR group. It looks like you are trying it on destination cell ?

Refer this document as well.
http://docs.hp.com/en/B7660-90017/ch06s03.html
Ivan Ferreira
Honored Contributor

Re: CA EVA has not have READ ONLY option! pls help

I have noted that after upgrade to XCS 6100, this option was removed from CV.
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
Nguyen Anh Tien
Honored Contributor

Re: CA EVA has not have READ ONLY option! pls help

Solution is as Sameer Nirmal saying.
Thanks you all
Regards
Tien
HP is simple