CA on XCS 6 with M-series

[jpmartin]

Hi,

on document Advisory (Revised): HP StorageWorks Enterprise Virtual Array XCS v6.110 Release, it is specified :


When running XCS 6.100 or later, M-series switches are not supported in HP Continuous Access EVA configurations.

I don't find this info on SAN Design Guide.

It is meaning that is running, or is it possible to use it a data migartion within the 60 days license period?

Cheers

Jean-Pierre

[IBaltay · Accepted solution]

Hi,

McData SAN switches and EVA 4x/6x/8x compatibility

a) EVA/XP CA is not supported using McData 4Gb san switch for hp p-class blade system in a CA path between the storage. However, it can coexist in fabric using CA.

b) EVA 4x/6x/8x can be directly connected only to the McData Intrepid 10000 director and only with the firmware 6.200. EVA 4x/6x/8x can coexist with the Intrepid 10000 with earlier version of the EVA firmware

c) EVA CA has not other support exceptions, except the one in b)

[jpmartin]

Hi,

it means that EDGE SWITCH 2/24, either with 6.100, 6.110 or 6.200, are not supported.

Thank you

Jean-Pierre

[jpmartin]

N/A