cancel
Showing results for 
Search instead for 
Did you mean: 

CV XP AE

DJMC
Regular Advisor

CV XP AE

Hi,
I am managing two XP24K arrays using CV XP AE v6.0. When I log on there is a message telling me to refresh the subsystem. When I try this I get an error code KAIC05601-E with description
"The RMI connection to "10.1.194.211" has failed. Check whether the specified storage subsystem type and IP address are correct, and check the network connection."

I can logon to the arrays ok using RWC so I know the networking is ok.

Any suggestions would be appreciated.
Thanks,
DJ
1 REPLY
ks6542
Valued Contributor

Re: CV XP AE

The communication with the connected array unit fails due to controller blockage, array unit failure, or disconnected LAN connection, etc., or the array unit receives a Reset/LIP from the host.

â Other applications are working concurrently and memory utilization or a CPU use rate is high.

I had faced this and I waited few mins and tried to reconnect and it worked..