Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

CVSDM configuration problems

Emilio Nunez
Occasional Contributor

CVSDM configuration problems

Hi Friends, I have a rx1620 and a rx2620 connected to a VA7110,
all the configuration to the Array was done using CVSDM installed on rx2620,
so we moved the rx1620 (ip changed) and the va7110 to a new physical location
and rx2620 was left with internal storage only , well here starts the problem,
rx1620 still "seeing" its LUN's with no problem but when I try to configure (create LUN)
the VA7110 using the CVSDM installed there (rx1620) I am not able to do it
when I run the launcher I am receiving
"error getting database reference from localhost"
and appears the SDM screen with no data, I will appreciate any help...thanks a lot.
.
1 REPLY
Torsten.
Acclaimed Contributor

Re: CVSDM configuration problems

Check these files and restart the daemons after modification:

/opt/sanmgr/hostagent/config/access.dat
/opt/sanmgr/hostagent/config/commIpAddr.txt

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!