Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Can not detect storage

Ayman Altounji
Valued Contributor

Can not detect storage

Hi there,
I have two servers PL 2500. Each server contains one smart 221
which connected to its own storage. Few days ago, for some reason
I move those two storages to other place, and connected one
storage to array 3200 and the other one to intergated array for
migration data. After migration, I connected those storage with its original smart array 221 my server just can not detected any logical
drive. While I reboot server, there is an error message shown as
follow: " External cable Atteched to Wrong SCSI port connectors".
However, by using ACU, Storage can be detected. But, there is no logical drive.
1 REPLY
Ayman Altounji
Valued Contributor

Re: Can not detect storage

Might try updating the controller firmware, but it's NOT a good idea to try to go backwards with array controllers. If you move up to a 3200, we can not guarantee you can go back to a 221.

Array Controller ROMPaq