Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Can't see the presented VDisk on the Host

SOLVED
Go to solution

Can't see the presented VDisk on the Host

I have created Virtual Disk in EVA 4000 and presented it to a windows based host. There is only one fiber connection from the host to the SAN switch. But, I still can't see the vdisk from the disk management after rescannig.

Any help, please.

2 REPLIES
Rob Leadbeater
Honored Contributor
Solution

Re: Can't see the presented VDisk on the Host

Hi,

When you added the host in Command View EVA, did the HBA's WWN appear in the drop down list, or did you add it manually ?

If you had to add it manually, that's an indication that there's some zoning configured on your switch which is preventing access to the EVA.

Hope this helps,

Regards,

Rob
Ivan Ferreira
Honored Contributor

Re: Can't see the presented VDisk on the Host

Check:

- Sanswitch connection, ensure that you can see the WWN of the Windows HBA in the sanswitch using "switchshow" command.

- Check the Topology of the HBA adapter, it should be set to fabric.

- Check the host type on the EVA host definition, it should be Windows.

- Check switch zoning configuration, if any.

- Reboot the windows server.
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?