Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Can we connect HP MSA1500 F100(SATA) to HP rp5470 Server?

SOLVED
Go to solution
MA Qiang
Regular Advisor

Can we connect HP MSA1500 F100(SATA) to HP rp5470 Server?

HP rp5470 with HP Tachyon XL2 Fibre Channel Mass Storage Adapter installed.
OS: HP-UX 11.11

Thanks.
1 REPLY
raadek
Honored Contributor
Solution

Re: Can we connect HP MSA1500 F100(SATA) to HP rp5470 Server?

What do you mean by F100? Are you talking about the MSA20 enclosure by any chance?

Generally you should be fine with your config - everything is supported according to the QuickSpec.

However you may find this comments useful:

"The MSA1000 for HP-UX supports dual active/active controller or single controller configurations (Active/passive not supported). HP-UX support is of a homogeneous nature. HP-UX single controller support is enabled with the standard firmware that ships with the MSA1000. HP-UX implemented with dual active controllers requires use of firmware available through a free download off the MSA1500 web site.


ACU/CLI (Command Line Interface) is used for configuration and Event Monitoring Service (EMS) for monitoring.

Root/Boot/Dump/Swap/Install is also supported.

PV Links is supported for multi (HBA) path / single controller (2 HBAs) and dual/active controller configurations.

Fabric and direct connect are supported

HP-UX 11.11 & 11.23, PA-RISC and Itanium"

Rgds.
Don't panic! [THGTTG]