Collect IOPS performance on MSA2312sa

[sujjapong]

Hi,

I have MSA2312sa connected to interconnect blade swtich 3G sas switch. how can I collect performance iops , controller utilization on MSA2312SA. Thanks,

[John Kufrovich]

The MSA2000 g2 line does not offer array perforamance stats. 

[sujjapong]

Have any softwrae for collect this array from HP?

[hvhari]

There are no softwares as such available. You will be able to monitor the peformance of vdisks via the operating system commands/tools.

For checking controller - you can use the command "show controller-statistics"

[John Kufrovich]

Hari

Your response is only relevant to P2000.  The customer has a MSA2000 G2 and the G2 line has never offered array stats.

[hvhari]

Hi John,

Thanks for correcting me. I just over looked the fact that it was G2 SMA.

[Johan Guldmyr]

Is it possible to get something (for example port statistics) from the SAS-switch?

[sujjapong]

Hi Johan,

As I checked HP 3G SAS Blade Switch does not have performance or statistics command. Please advise. Thanks,

Sujjapong.

[Johan Guldmyr]

Then it appears that you are limited to getting the statistics from the OS/servers that you have presented the disks to.