Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Command View EVA 7

Jacques Staal
Occasional Contributor

Command View EVA 7

I have CVE 7 installed on a windows 2003 management server and connected it to an EVA 5000 (VCS 4.004) via a FC switch. CVE launches allright however no array is discovered and an error message appears. The navigation tree remains empty. What might be the reason
4 REPLIES
Víctor Cespón
Honored Contributor

Re: Command View EVA 7

Check the FC connections between that server and the EVA, and the zoning.
Jacques Staal
Occasional Contributor

Re: Command View EVA 7

Connections are checked and OK. So the problem lies somewhere else.
Víctor Cespón
Honored Contributor

Re: Command View EVA 7

What's that error message you get when opening Command View?
Mark Poeschl_2
Honored Contributor

Re: Command View EVA 7

Do you see the "HP Command View EVA" service as "Started" on your management server?

Also - this may be redundant, but you never actually confirmed that you checked the zoning in your FC switch. If you log into the switch, do you see that the management server has logged in to the fabric?