Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Command View SANMGR access

SOLVED
Go to solution
UVK_1
Advisor

Command View SANMGR access

Hello Experts!!

We have a VA7410 attached to 2 HPUX server. If I have to do any storage administration I have to start the script
/opt/sanmgr/commandview/client/sbin/launcher
which opens up HPStorage works stuff on reflection as X11 forwarding is enabled.
My problem is the access is very very slow and I just have to wait ages for the storage works console to come up. Is there a way I can setup access this using broswer based console ?

Thanks in advance!

- UVK
6 REPLIES
krusty
Honored Contributor
Solution

Re: Command View SANMGR access

I believe you can accesss the Command View server via the browser by using this command:

http://:4096/Launcher.html

example:
http://hpux01:4096/Launcher.html

Host is the host with Command View sdm on it.

Cheers,

Curt
"In Vino Veritas"
Torsten.
Acclaimed Contributor

Re: Command View SANMGR access

"My problem is the access is very very slow and I just have to wait ages for the storage works console to come up."

Well, it's java.


Try the command line tools.

# cvui

or

# arm...
(armdsp, armmgr, ...)

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
UVK_1
Advisor

Re: Command View SANMGR access

First thank you much for your replies !!

Curt,

I tried using the way given by you but dnt work, Is there any service that I need to start for this to work ?

Torsten,

The command you gave me are cool. Is there a doc that I can refer to get more details on these commands ?

Appreciate your help.

Cheers,
UVK
Torsten.
Acclaimed Contributor

Re: Command View SANMGR access

somewhere on

http://www.hp.com/go/bsc

-> storage software

must be the commandview sdm manual.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
UVK_1
Advisor

Re: Command View SANMGR access

Thanks guys

I got it running. I had to add my system ip to access.dat file and need a certificate to be generated from array connected host to use in my system brower.

Though its a java applet it 90 times faster than previous console.

Mates of ITRC rock as always.

Cheers,
-UVK
krusty
Honored Contributor

Re: Command View SANMGR access

Sorry, I've submitted this twice and it keeps losing it. Let's try this one more time

Yes there are services (a host agent running a daemon in the Unix world). Here's what you need to do:

1) There is a security file you need to edit to allow web access. The file is located here:

/opt/sanmgr/hostagent/config/access.dat

Just edit the file and add the IP address of the users you want to allow access to. You can use wild cards, i.e. 192.168.1.*

2) You'll need to restart the host agent to re-read the access.dat file.

/opt/sanmgr/hostagent/sbin/HA_trigger stop
/opt/sanmgr/hostagent/sbin/HA_trigger start

You may need to update Java, but I think that's mostly what you need to do. Hope this helps.

Cheers,

Curt

"In Vino Veritas"