Command View direct to server

[Jesus Fdez.]

Hello,
I have a CV v9.3 directly connected to a EVA4400 (09534000) and do not see.

Why might that be? Does the CV does not support direct connections to the EVA?

Thanks,

[Steven Clementi]

Does the server see the EVA in the Device Manager?

Steven

[Jesus Fdez.]

Device manager does see the EVA.
From the management module of the EVA. I make a virtual disk, I present and all ok.

Device manager does see all disks.

Thanks,

[Víctor Cespón]

Check in SPOCK that the FCA you're using supports direct connect to an EVA4400. Not all support this. And check what driver you're using.

I had a case recently with an Qlogic HBA that Command View could not access the EVA if the latest driver was installed.

[Sivaramakrishna_1]

If u have Brocade HBA on the system, then there is a know issue that Command view EVA will not work.

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=471497&prodTypeId=12169&objectID=c01980363

The same issue has been observed for 4GB HBA also. The windows Patch is solved the issue.