Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Command View direct to server

Jesus Fdez.
Valued Contributor

Command View direct to server

Hello,
I have a CV v9.3 directly connected to a EVA4400 (09534000) and do not see.

Why might that be? Does the CV does not support direct connections to the EVA?

Thanks,
4 REPLIES
Steven Clementi
Honored Contributor

Re: Command View direct to server

Does the server see the EVA in the Device Manager?

Steven
Steven Clementi
HP Master ASE, Storage and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5)
RHCE
NPP3 (Nutanix Platform Professional)
Jesus Fdez.
Valued Contributor

Re: Command View direct to server

Device manager does see the EVA.
From the management module of the EVA. I make a virtual disk, I present and all ok.

Device manager does see all disks.

Thanks,
Víctor Cespón
Honored Contributor

Re: Command View direct to server

Check in SPOCK that the FCA you're using supports direct connect to an EVA4400. Not all support this. And check what driver you're using.

I had a case recently with an Qlogic HBA that Command View could not access the EVA if the latest driver was installed.
Sivaramakrishna_1
Honored Contributor

Re: Command View direct to server

If u have Brocade HBA on the system, then there is a know issue that Command view EVA will not work.

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=471497&prodTypeId=12169&objectID=c01980363

The same issue has been observed for 4GB HBA also. The windows Patch is solved the issue.