Disk Enclosures
1748246 Members
3035 Online
108760 Solutions
New Discussion юеВ

Command for Secure path version on Netware

 
SOLVED
Go to solution
inex
Super Advisor

Command for Secure path version on Netware

Anyone who knows a command a customer can use in Netware to verfiy the version of Secure Path installed on a Netware 6.5 server?

thanks

- inex
3 REPLIES 3
Rob Leadbeater
Honored Contributor
Solution

Re: Command for Secure path version on Netware

Hi,

I'v'e never used Netware, but you might have some luck with "spmgr version".

Hope this helps,

Regards,

Rob

IBaltay
Honored Contributor

Re: Command for Secure path version on Netware

Hi,
maybe this could help you:
SecurePath support page for Novell Netware:
http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManualтМй=en&cc=us&docIndexId=64179&taskId=101&prodTypeId=18964&prodSeriesId=1814948
the pain is one part of the reality
inex
Super Advisor

Re: Command for Secure path version on Netware

Thanks for your help

-inex