Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Communication between the 100b and HP Command View EVA 8

Sorine
Advisor

Communication between the 100b and HP Command View EVA 8

Hello
I have connected the (FC1,FC2) on mpx100b and the FP ports on each EVA4400 controllers to FC switch
I have connected the MGM port and GE1 port on mpx100b to IP switch

When I log into mpx manger everything seems to work okay I see the HSV controllers listed as FC ports discovered targets

My problem is when I try to add the IP address in CV to Discover iSCSI Devices I have this error "Error received from the iSCSI Controller. See log file for details"

All IP address used are in same network
The version of firmware in mpx100b is 2.4.2.0

What can be the problem...?
3 REPLIES
marsh_1
Honored Contributor

Re: Communication between the 100b and HP Command View EVA 8

sorine,

so whats in the log file ?

marsh_1
Honored Contributor

Re: Communication between the 100b and HP Command View EVA 8

sorine,

what version of cv are you using , needs to be at least v8 for mx100 2.4 and upwards.
Sorine
Advisor

Re: Communication between the 100b and HP Command View EVA 8

Yes thank you, that seems to be the problem, i have upgraded CV 8.0.1 to CV 8.0.2 and it works. I can now see the ISCSI device in CV
thx again