Disk Enclosures
1748151 Members
3865 Online
108758 Solutions
New Discussion юеВ

Re: Configuration MSA2000

 
Rene Claassen
Member

Configuration MSA2000

Hi

Can somebody tell me how to backup the configuration of a MSA2000.

I cann't find this option in the GUI or CLI.

Thx in advance

Rene
9 REPLIES 9
Sivakumar MJ._1
Respected Contributor

Re: Configuration MSA2000

Rene.

Manage
> Utilities
> Configuration Utilities
> Save Config File
Rene Claassen
Member

Re: Configuration MSA2000

Thx, But i haven't a tab manage. So this is not the solution.

It's an MSA 2312fc with firmware m100r18.

Thx

Rene
divakar.k
Valued Contributor

Re: Configuration MSA2000

Once you login to the SMU, On the left side you find a section "Manage" it is not a tab as such.

Once you click on manage it will prompt you for user name & password, if you have logged in as monitor user

Hope this helps
Rene Claassen
Member

Re: Configuration MSA2000

Hi,

I've attached a screen dump. I cann't find te manage thing.

I think this is an other version of the MSA you refer to.

This is an MSA2312fc with fw M100R18

Thx in advance
Kranti Mahmud
Honored Contributor

Re: Configuration MSA2000

Hi Rene,

how to backup the configuration of a MSA2000--> you can controller A with the ip address 10.0.0.2 and controller B with 10.0.0.3. The subnetmask is 255.255.255.0. You can connect the controller with a serial connection and the parameters 115200 baud, 8 data bits, no parity, 1 stop bit and no flow control. After connecting to the serial CLI you can execute the command: show_tech_support

The output can saved as the backup of MSA configuration.

Rgds-Kranti

Dont look BACK as U will miss something INFRONT!
Johnny von Heimerall
Frequent Advisor

Re: Configuration MSA2000

Hi All,

The first reply is for MSA2000 G1 and "show tech_support" is for MSA1x00.

Now, for the G2, i couldnt find any easy command as for the G1. So insead i would recommend saving output from CLI.
Just telnet in to one of the controllers and save the output recommended here:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01797449тМй=en&cc=us&taskId=101&prodSeriesId=3687115&prodTypeId=12169

Best regards,
Johnny
Aaron Rosillo Silva
New Member

Re: Configuration MSA2000

Hi All.

Does anybody known the default user and password to configure a MSA2000? thru the ip 10.0.0.2.

Regards.
Johan Guldmyr
Honored Contributor

Re: Configuration MSA2000

something with "manage" I recall.. maybe this ought to be a new thread?
Johnny von Heimerall
Frequent Advisor

Re: Configuration MSA2000

The default password is " !manage "
-without the quotation marks.

Please use the search function or create a new thread next time to keep in topic.