Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Configuration of MSA30

SOLVED
Go to solution
Allan Joergensen_1
Occasional Visitor

Configuration of MSA30

Hi,

The HP array configuration utility exist only for Windows,Linux,Open VMS and True64. Which tools exist on HP-UX? I want to configure a software RAID5 or RAID6, which should be possible according to the Linux manual.


Regards
4 REPLIES
kris rombauts
Honored Contributor
Solution

Re: Configuration of MSA30

Allan,

the ACU (Array Configuration Utility) is a utility used for a H/W raid controller card called 'SmartArray', not for software raid. If you have this type of card in your UX system, then use 'saconfig' to configure H/W raid.


# man saconfig

NAME

saconfig - Command Line Configuration Utility for the HP A7143A RAID160 SA SCSI Adapter
......


If you want software mirroring like you wrote, then i guess you need to use LVM.



HTH

Kris
Sandy Chen
Honored Contributor

Re: Configuration of MSA30

Hi Allan,

Do you connect the MSA30 to the server using any Smart Array Card?

If you do, for HPUX, you can use the saconfig like Cris said

If you don't have it installed, you can locate the software from software.hp.com and search for product number of the Smart Array Card

regards,
Sandy
I never think of the future. It comes soon enough.
Allan Joergensen_1
Occasional Visitor

Re: Configuration of MSA30

Hi Sandy and Kris,

Thank you very much for the answers :-)

I've check the interface card, it's 'only' a A7173A HP Dual Channel Ultra320 SCSI Adapter. It seems Software RAID is the only solution or I could buy a Smart Array Card.

Can LVM handle RAIDS systems other that RAID0 and RAID1?

Regards
Allan
Thomas J. Harrold
Trusted Contributor

Re: Configuration of MSA30

No, LVM only handles Raid1, and raid0. (striped mirrors also, if you don't mind a 1MB stripe width!)

You could use Veritas volume manager (basic is provided free with HP-UX, advanced features can be purchased from HP or Veritas.

Depending on your storage and performance requirements, you may just want to stick with raid1 and LVM. It's simple, reliable, and performs well.

-tjh
I learn something new everyday. (usually because I break something new everyday)