Configuring RP4440, HP-UX 11.11 to 9570V

[Joan Kelly]

I have the same hardware and we have configured through DAMP. My OS is HP-UX 11.11. My servers are clustered, so how do you see the hitachi disks from both systems to configure the volume groups? I have done insf -e and ioscan only sees the primary/secondary paths for its disks. thanks in advance. Can't see anything in SAM.

[Ashwani Kashyap · Accepted solution]

Were the disks assigned to the HBA's of both the systems in your cluster .
Unless they are assigned mor masked for the HBA's of both the systems , they will not see it .

[Ted Buis]

The disk array needs to present the LUNs to both servers. If you don't get see it in an ioscan, then it is most likely that your array has LUN security to block all but the one host from seeing it.

[Joan Kelly]

I had the Hitachi engineer reconfigure the Ports for the fibre channel. Once they were the same, both servers can now see all disks. thanks and consider this closed.