Continious Access setup

[inex]

Hi,
I have connected an EVA4400 and EVA6400 through Brocade switches. I have zoned the EVA ports together. EVA6400 port 2 and 4 on both controllers with port 1 and 2 on the EVA4400. In CV under view remote connections, there is no no paths. We have CV 9.2. So far I have not set the aptpolicy. Any ideas why they can't set up paths between the EVA's.

-inex

[Bulent ILIMAN · Accepted solution]

do you have Cont.Acc license for both EVAs?

and what are the XCS Versions?

[susanta_dutta]

Hi inex,

By any chance , are you running 09534000 on any array

If an Array is initialized with XCS 09534000 or later, Exchange-based routing option is set by default. In order to create any Data Replication(DR) relation with an Array running lower than XCS 09534000, set Data Replication Protocol to â HP FC Data Replication Protocolâ from Data Replication > Data Replication Option > Set Data Replication Protocol option.

Refer latest CA Implementation Guide at hp.com/go/caeva for more information on this.

Regards
Susanta

[inex]

Both EVA's have xcs 09534000 version