Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

Continuous access problem with protection mode enabled

mahn
Occasional Visitor

Continuous access problem with protection mode enabled

hello,

I have problem registering a disk when protection mode is enabled.

 

# echo /dev/rdisk/disk20 | raidscan -find inst -ICA100
raidscan: The registration has been canceled due to enough for HORCM.

(same problem on the other node)

 

 

Without protection mode I can paircreate/pairsplit/pairdisplay.

 

San administrator assure me that on both nodes the command devices are in the same hostgroup than the data devices.

 

Any idea? This is the first time I use the protection mode so I may have missed some point.

 

Thanks for your attention, regards

Emmanuel

2 REPLIES
hvhari
HPE Pro

Re: Continuous access problem with protection mode enabled

What is the storage system used here? What is the host OS?

Regards,
Hari

If this post was useful , click the Kudos Star on the left side to say Thanks!
mahn
Occasional Visitor

Re: Continuous access problem with protection mode enabled

OSes are hp-ux 11.31

Arrays are both xp 24000   firmware 5001