Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

D2600 with P812 controller failing logical drives

Waynewall
Occasional Visitor

D2600 with P812 controller failing logical drives

I have a DL160 G6 server with a P812 controller connected to a D2600.  The D2600 has 12 x 3TB drives.  We use this server for backupexec and as a Deduplication store.  We continue to lose our logical drives stating they have failed.  We have replaced drives but continue to have same issue.  Firmwares are all up to date, and we are running server 2008 r2. 

 

We can reinitialize the logical drive after failure but have noticed corrupt data.  It seems to happen about 12-15 hours into being utilized.  Controller card shows no logs of failures.  Our supplier support team has replaced drives, and the P812 on warranty.  Anyone run into this or have any suggestions?

 

Wayne

 

 

P.S. This thread has been moved from Servers > General to Disk Array - HP Forums Moderator

2 REPLIES
Johan Guldmyr
Honored Contributor

Re: D2600 with P812 controller failing logical drives

Does the ADU report (report) give any high error counters?

Waynewall
Occasional Visitor

Re: D2600 with P812 controller failing logical drives

Hi

 

I found the following.  This was the highest error count that I found. 

 

[   Top ] → [ Smart Array P812 in slot 2 ] → [ StorageWorks D2600 at Port 2E :   Box 1 ] → [ Drive Cage on Port 2E ] → [ Physical Drive (3 TB SATA) 2E:1:1 ] →   Serial SCSI Physical Drive Error Log

Entry Size

20 (0x14)

Entry Count

64 (0x0040)

Next Entry Offset

0x3a

Errors Logged

1146 (0x0000047a)