Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

DL145 SATA Drivers SBS 2003

John Casebeer
Occasional Visitor

DL145 SATA Drivers SBS 2003

I have a DL145 with 80G NHP hard drive and I am trying to load Windows Small Business Server 2003 Std. Every driver I have found and loaded on a 3.5" fails on install. I need to know which driver is correct for the embedded SATA controller. I have installed the OS on this hard drive on an ML110 G3 and it worked fine but blue screens when inserted in the DL145?!
3 REPLIES
chongkan
Trusted Contributor

Re: DL145 SATA Drivers SBS 2003

Here is an acceptable workaround while we find the drivers and some information you might need:

1- PATA = Paralell ATA 133 MB/s
2- SATA = Serial ATA 150 MB/s

Workaround:

----

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1108822

Quoting: I figured out a work around. In the cmos go to advanced and change SATA settings from SATA to PATA and the OS will find the drives. I imagine they will come out with a working driver some day. Until then, I will prolly have degraded disk performance. Switching back to SATA mode after the OS install results in the BSOD experience.

Here is a quote from the OS config guide: Use the native SATA mode if you are installing a Linux operating system. Use the PATA setting if you are installing Microsoft Windows.
CAUTION: If you do not change the SATA mode setting to PATA before you install Windows with the default ATA driver, the
operating system will hang.

JD

----

chongkan
Trusted Contributor

Re: DL145 SATA Drivers SBS 2003

Take a look to page 14 and 15

Software Configuration Guide:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00845465/c00845465.pdf

John Casebeer
Occasional Visitor

Re: DL145 SATA Drivers SBS 2003

Thank you! I actually finally figure that out. Weird you have to use PATA and apparenly there is no driver to use SATA emulation?! Thanks fo the help!