HPE Community
Disk Enclosures
1751720 Members
4046 Online
108781 Solutions
New Discussion юеВ

Re: DL360 with 5300 Controller - unable to configure internal drives

 
Ron Dickison
New Member

тАО03-09-2004 05:36 AM

тАО03-09-2004 05:36 AM

DL360 with 5300 Controller - unable to configure internal drives

We are piecing together some used equipment. I have a DL360 G1 with 5300 series controller and two internal 18.2 ultra3 drives. During array configuration the utility is unable to locate the drives. Any suggestions?
0 Kudos
Reply
2 REPLIES 2
john_347
Regular Advisor

тАО03-09-2004 11:31 PM

тАО03-09-2004 11:31 PM

Re: DL360 with 5300 Controller - unable to configure internal drives

Hi.

Why not use the onboard array controller ?? I presume its still there ?? Much easier

regards

john
0 Kudos
Reply
Ron Dickison
New Member

тАО03-10-2004 02:07 AM

тАО03-10-2004 02:07 AM

Re: DL360 with 5300 Controller - unable to configure internal drives

The internal controller is not there. I however, reseated the backplane on the drive riser card connecting to the drives and the problem is resolved.
Thanks for your input.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.