Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

EVA 3000 and secure path

ASO MANUFACTORING
Occasional Contributor

EVA 3000 and secure path

Monday morning I'm going to install secure path for EVA 3000. Is the first time that I see Secure Patch, can anybody some suggest, some help, doc,manual to study next weekend ?
Always trouble
2 REPLIES
Steven Clementi
Honored Contributor

Re: EVA 3000 and secure path

Are you installing it on a Windows system?

It is a real basic install.

The proper order would be (if your building the server from scratch)(and for Windows)...

1. Leave the fibre cables unconnected but install the fibre cards.
2. Load up the OS and any service packs.
3. Grab any needed security updates and patches.
4. Load up the EVA Platform kit Drivers (QLogic or Emulex). At this point, you do not need to reboot, but feel free to since HP suggests it.
5. Load up Secure Path 4.0c and reboot


The Installation will consist of several steps...

1. Basic Installation Wizard
2. Prompting for installation of AutoPath, select No since you have an EVA.
3. Set your agent password
4. Set the clients that are allowed to access the agent.
5. Reboot

As for doc's..

Main Secure Path site...
http://h18006.www1.hp.com/products/sanworks/secure-path/index.html

From there, you can get to most of the docs for Secure Path.

Steven
Steven Clementi
HP Master ASE, Storage and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5)
RHCE
NPP3 (Nutanix Platform Professional)