Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

EVA 4000 OCP Menu Description

Amator110
Occasional Visitor

EVA 4000 OCP Menu Description

Hi All.
I am new to EVA 4000.
dose anyone say me where can I find full description of OCP Menu
For example I want to know what happen when set EVA auto-bypass Enabled or desabled in IO Module Config and this question is abount another menu such as
"Loop Recovery Config"
"Unbypass Devices"
4 REPLIES
IBaltay
Honored Contributor

Re: EVA 4000 OCP Menu Description

Hi,
maybe it is better to install the Command View EVA/SSSU management tools on the SAN attached host (prefferably not the heavy loaded and citicaly important application server :-))
the pain is one part of the reality
IBaltay
Honored Contributor

Re: EVA 4000 OCP Menu Description

and if you install e.g. the WEBES app, it can notify you e.g. via the mail or if you have any SNMP based management server it can be configured in WEBES to be a destination of the SNMP traps...
the pain is one part of the reality
Uwe Zessin
Honored Contributor

Re: EVA 4000 OCP Menu Description

> "Loop Recovery Config" / "Unbypass Devices"

These are tools for trained service technicans and should not used by the end-user unless being told so in a troubleshooting situation when no trained person can be brought on-site.
.
IBaltay
Honored Contributor

Re: EVA 4000 OCP Menu Description

Hi,
as Uwe have said, these debug/print flags settings/functionality is not public. It is very specificaly intended for the debugging process to troubleshoot the serious internal EVA HW problems.

There are other tools for the continuous proactive monitoring of EVA health as written above...
the pain is one part of the reality