EVA 4100 + CV EVA

[Grayh]

Hi,

I have received a Brand New EVA 4100 Starter Kit for the Blades.

I need to Install & Configure it in the lab.This will be connected to a BL860C.

Could you walk me through the process of Installing & Configuring it and bring it finally to Production.

Also I have to Install the CV EVA.

Any documents would be helpful.

[Steven E. Protter · Accepted solution]

Shalom,

We'll to talk you through it I'd need your phone number.

Better I give you some docs.

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1239652

http://forums11.itrc.hp.com/service/forums/bizsupport/questionanswer.do?threadId=1191688

http://h71028.www7.hp.com/ERC/downloads/4AA0-8501ENW.pdf

Make sure your system is well patched. Handle the EVA firmware and get every bit of firmware and software current on the system before going live.

SEP

[Grayh]

Thanks for the information Stevan,

While going through the docs, I had a few querries

---->EVA4100 Bladesystem F INS Starter Kit
o What is "F INS"

---->What is a Complex SAN & a Simple SAN

---->If I am Correct
Emlux EZ Pilot is to Simplify SAN Only in Windows Environment(I do not have to do anything to do with it)

---->Could you also provide me some documentation on installing CV EVA and how to work on it.

---->And the one if you can spare bit of ur time.

o When I am Installing the my first 860c blade in C7000 Enclosure(The C7000 Enclosure is also Brand New) Do the Enclosure needs to be powered ON & also how many Max. BL 860c blades can be installed in an C7000 Enclosure.


Thank you

[Grayh]

I am still waiting... Can someone help me

[Grayh]

Thank you