HPE Community
Disk Enclosures
1753529 Members
4903 Online
108795 Solutions
New Discussion юеВ

Re: EVA 4400 INSTALL A NEW DISK ENCLOSURE EMPTY

 
PEDRO J. RAMON
Advisor

тАО04-23-2010 01:11 AM

тАО04-23-2010 01:11 AM

EVA 4400 INSTALL A NEW DISK ENCLOSURE EMPTY


I can connect a new disk enclusure diskless an EVA 4400.

Do I need to have any drive connected to this enclosure will recognize the EVA, or that only happens in the EVA 4000?

I have more enclosure whit disks.

Thanks.
0 Kudos
Reply
2 REPLIES 2
Eemans Dany
Honored Contributor

тАО04-23-2010 01:46 AM

тАО04-23-2010 01:46 AM

Re: EVA 4400 INSTALL A NEW DISK ENCLOSURE EMPTY

Hi,

If you install a new enclosure without disk, it will not be recognized by the EVA.
A statement from HP tells that you need at least 4 disks in your enlosure to be detected and operational.

Dany
0 Kudos
Reply
Torsten.
Acclaimed Contributor

тАО04-23-2010 02:00 AM

тАО04-23-2010 02:00 AM

Re: EVA 4400 INSTALL A NEW DISK ENCLOSURE EMPTY

AFAIR at least 1 disk, but however, no disk will not work.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.