Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

EVA 4400 disk changed and unpopulated

SOLVED
Go to solution
Andrea Resch
Occasional Advisor

EVA 4400 disk changed and unpopulated

After changing a failed disk, the new one is
unvisible. The bay is in status "unpopulated". Whats to do with it to come to ungrouped disks?
8 REPLIES
Torsten.
Acclaimed Contributor

Re: EVA 4400 disk changed and unpopulated

It takes some time before the status is changed in command view.

Consider to try "refresh" from CV screen or restart the CV service.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Andrea Resch
Occasional Advisor

Re: EVA 4400 disk changed and unpopulated

I'm waiting since 3 hours and started the CV often.
hvhari
HPE Pro

Re: EVA 4400 disk changed and unpopulated

unpopulated comes when eva is not sensing any disks in the slot. Can you confirm its seated properly & what are the LED indications on the disk ?
Regards,
Hari

If this post was useful , click the Kudos Star on the left side to say Thanks!
Torsten.
Acclaimed Contributor

Re: EVA 4400 disk changed and unpopulated

Did you restart the browser only or the CV service? Restart the service.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Andrea Resch
Occasional Advisor

Re: EVA 4400 disk changed and unpopulated

The LED's are green like the others.
Sorry, but I don't know how to start the CV.
I thought it refreshs with log off and log on.
What's to do to start the service?
Torsten.
Acclaimed Contributor
Solution

Re: EVA 4400 disk changed and unpopulated

I assume you know how to start / stop windows services - so look for HP command view there, stop and start it.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Andrea Resch
Occasional Advisor

Re: EVA 4400 disk changed and unpopulated

Many thanks for the very fast and functional informations.
Andrea Resch
Occasional Advisor

Re: EVA 4400 disk changed and unpopulated

Thanks and by.