cancel
Showing results for 
Search instead for 
Did you mean: 

EVA 4400

SOLVED
Go to solution
H4Dy
Occasional Contributor

EVA 4400

Hi all.

I am new comer for using HP EVA 4400. Can i reconfigured vdisk after i deleted it? If yes, how to reconfigured it?


Thanks,
3 REPLIES
Uwe Zessin
Honored Contributor

Re: EVA 4400

No. Once a virtual disk has been deleted, it's gone.

You can, however, create a _new_ virtual disk with the same size / VRAID-level and present it to the same server.

Don't expect to be able to access the old data! The EVA might have allocated different disk areas for the new vdisk and those areas are deleted before use anyway.
.
H4Dy
Occasional Contributor

Re: EVA 4400

Thanks Uwe.

I have some issue about this EVA last week so the vdisk has been deleted. I hope to i have get the data back.

Other helping for you, if one enclosure has a problem (the disk is OK). Can i get the data when i change another enclosure (i don't remove the position of the disk)?

Thanks,
Uwe Zessin
Honored Contributor
Solution

Re: EVA 4400

The EVA tags all the disk drives with data on them. In the past I have pulled all disks from a system and put them into a new one (without any disks). I did not care about the disk positions, but all data was accessible.

.