Disk Arrays
cancel
Showing results for 
Search instead for 
Did you mean: 

EVA 8000 and MPIO problem on Win2k3

NathanK
Regular Advisor

EVA 8000 and MPIO problem on Win2k3

Ok, we have a win2k3 server that was working on fine on the SAN. The server had to be rebuilt for whatever reason. The storage wasn't disabled during the rebuild. Now after MPIO has been installed it still shows all the disks seperatly instead of combining them into one in Disk Manager. I've unpresented and even deleted the lun, but it still shows as 4 seperate disks when only one should be showing. Any ideas?

Thanks!
Nathan
If there is no solution then there is no problem
2 REPLIES
Robert Dobalina
Valued Contributor

Re: EVA 8000 and MPIO problem on Win2k3

Are you certain you grabbed the right mpio? Otherwise this is easy and no real bugs. Only suggestion I could make is uninstall\unpresent and install as if it was new.
NathanK
Regular Advisor

Re: EVA 8000 and MPIO problem on Win2k3

Yea I had the SA do that as well. No luck. I think I will check to see if it has been installed correctly. Please continue to offer suggestions!

NathanK
If there is no solution then there is no problem