Disk Enclosures
1748071 Members
5419 Online
108758 Solutions
New Discussion юеВ

EVA 8400 Cabling Guide

 
Anubhav Dhingra
Frequent Advisor

EVA 8400 Cabling Guide

Hi All,

I need the cabling diagram of EVA 8400 2C6D. we have recieved the EVA 8400 from HP factory and the DiskEnclosures were shipped out of the Rack. Only HSV controllers were Factory Inegrated in the Rack.
3 REPLIES 3
Uwe Zessin
Honored Contributor

Re: EVA 8400 Cabling Guide

A few weeks back I've looked it up for a customer:

- HP StorageWorks 6400/8400 Enterprise Virtual Array

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManualтМй=en&cc=us&docIndexId=64179&taskId=101&prodTypeId=12169&prodSeriesId=3900918

- HP StorageWorks EVA6400/8400 M6412A disk enclosure installation instructions
5697-0474__20100520.pdf (2.204MB - June 2010) [2ed] - c02248317

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02248317/c02248317.pdf


The cabling of more than one enclosure is not explained well I think, so I made an ASCII drawing based on Figure 14 on page 6 - attached. ("/" indicates the short cables)
.
Sivaramakrishna_1
Honored Contributor

Re: EVA 8400 Cabling Guide

Hi,

The EVA8400 is supposed to be installed by HP Filed Specialist.

You can log a case to HP Installation supoort to get it installed.

Regards,
Siva
Mike Texter
Valued Contributor

Re: EVA 8400 Cabling Guide

Not everyone has an HP support contract, thanks Uwe for the links!
Hardware Specialist