EVA Controllers

[Feljav]

In the Operator Control Panel (OCP), what is the function of the systmen information sub item:
UUID Unique Half,
Debug Flags,
Print Flags?

[Uwe Zessin]

Some of them are for special diagnostic functions done by trained service personal. Please don't touch them! You can set up a condition where the EVA does not boot any longer.

[tkc]

UUID Unique half ==> Display the unique half of the controller UUID. Controller A and B UUIDs are displayed in Command View EVA on the Controller Properties page.
(Hardware > Rack > Controller Enclosure > Controller A or Controller B).

Debug flags ==> View and set debug flags. This option is set during troubleshooting with the experts. You don't normally do anything with it during normal operation.

Print flags ==> View and set several print flags. This option is also set during troubleshooting with the experts to allow printing output to the screen of the terminal display connected the serial port of the EVA controller.

Hope the info helps.