cancel
Showing results for 
Search instead for 
Did you mean: 

EVA WWN

SOLVED
Go to solution
Hasan_9
Regular Advisor

EVA WWN

Hi,
I want to install an EVA 4000 for myself.
I want to enter its WWN.Should I enter twice (for each of controller) or just one time in one of the controllers? What about password?
5 REPLIES
Uwe Zessin
Honored Contributor
Solution

Re: EVA WWN

It is only entered on one controller - after you confirmed the checksum, both controllers receive the WWN and you can initialize from CV-EVA.

I don't use passwords in environments where everything is controlled by the same group, because there are some maintenance functions the require the removal, so why bother?
.
kamal_9
Super Advisor

Re: EVA WWN

Hi Hasan

You need to keyin only the WWN and the checksum value pasted in the Rack .
Then the controller will start binding by itself .

Hasan_9
Regular Advisor

Re: EVA WWN

Thank you,
Now, my Commandview cannot find the EVA.
I have just one SAN switch,my management server has just one HBA. I connect 4 EVA's connection to this SAN switch, I connect to CV but it cannot detect the EVA. I try some more times with discover button but nothing happened.
Hasan_9
Regular Advisor

Re: EVA WWN

I forgot to say, my HBA in management server is has just one port.( I am not sure it is important!)
Uwe Zessin
Honored Contributor

Re: EVA WWN

The adapter need to have access to both controllers, because CV-EVA talks to the master controller and the role can change.

Can you rule out a zoning error in the FC switch?
.