EVA occupancy level

[LarsW]

Hello
i have a question about the EVA occupancy level.

in some hp guides i found that the default level rate is 95%.
in some other hp guides i found that the default level is 90%.
What ist the default level?

best regards

[Uwe Zessin · Accepted solution]

From what I remember the warning level's default has always been at 90%.

[Víctor Cespón]

That depends on the size of the disk group. Initially the recomendation was 90%, but 10% of a disk group with many big diks can be several TB, so for big disk groups you can raise it to 95%.

As long as you leave 2 x (biggest disk on disk group) free, it's fine.

[LarsW]

Hello

at the moment i am learning for the hp0-j33 exam. in the implementing eva solution guide ist the default level 90%.
In some other hp EVA Guides are the level at 95%...

therefore the question

[Steven Clementi]

When you create a Disk Group, the default setting is 90%.

I just did this last week on a re-initialized EVA5000 so I know it has not been changed since then.

The other guides you might be reading "might" be referring to a suggested setting based on the size of your disks and how many disks are in the group.


Steven

[Uwe Zessin]

So, as usual in tests, you have to carefully analyze the question ;-)
Good luck!

[LarsW]

hi,
thanks a lot for the fast answers. i think 90% is a good number...

[LarsW]

closed