Disk Enclosures
1748214 Members
3295 Online
108759 Solutions
New Discussion юеВ

EVA4400 disks seen as rscsi in hp-ux 11.11

 

EVA4400 disks seen as rscsi in hp-ux 11.11

Hi all!
I have a cluster of 2 rp4440 with exactly the same patching and software.
This morning, I started mapping new disks of a new EVA4400, and curiously, one node see the disks correctly but the other one, see all the disks as sctl ( /dev/rscsi)cxtydz )
I have double-checked that the operating system selected in CV EVA is HP-UX and made rmsf - insf with all the flags a lot of times, but no way.

Any idea why it could be??

Best regards
3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: EVA4400 disks seen as rscsi in hp-ux 11.11

Seeing is believing, can you post some more (best would be an ioscan -fn together with an evainfo output)?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   

Re: EVA4400 disks seen as rscsi in hp-ux 11.11

Finally it was solved rebooting the server...

I though there was a lot of "bad stuff" in /dev/rdsk /dev/dsk

I clean up the directories and reboot

Best regards

Re: EVA4400 disks seen as rscsi in hp-ux 11.11

reboot server