Disk Enclosures
1748084 Members
5012 Online
108758 Solutions
New Discussion юеВ

Re: EVA8100 Active/Passive

 
Hasan_9
Regular Advisor

EVA8100 Active/Passive

Hello,

I want to configure my EVA8100 in Active/Passive mode. What should I do? What version of XCS support A/P on EVA8100?

Please advice.
hasan
3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: EVA8100 Active/Passive

Why?

This array is a/a.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Patrick Terlisten
Honored Contributor

Re: EVA8100 Active/Passive

Hello,

IMHO is there no way to configure an EVA this way. EVA mit XCS is always A/A. Only EVA 3000 and 5000 with VCS <4.x are A/P.

Hope this helps,
Patrick
Best regards,
Patrick
Tony Valentim
Occasional Advisor

Re: EVA8100 Active/Passive

Don't understand why you would want to do that, but you simulate that using MPIO by forcing a perferred path.

The 4x00/6x00/8x000 are active/active that's it