HPE Community
Disk Enclosures
1752786 Members
5883 Online
108789 Solutions
New Discussion юеВ

Error message is attached, Please help.

 
Mehdi Izadi
New Member

тАО08-08-2005 10:52 PM

тАО08-08-2005 10:52 PM

Error message is attached, Please help.

Dear all,
Please find attached the error details of our EVA. I am wondering why such errors are being recorded.

- Thanks -
0 Kudos
Reply
2 REPLIES 2
Ivan Ferreira
Honored Contributor

тАО08-09-2005 01:39 AM

тАО08-09-2005 01:39 AM

Re: Error message is attached, Please help.

From the log, it seems that a power supply/fan is having problems. You should goo to the eva and see the EMU (at the rear), if you are having an error code.

Also it seems that you are having 1 failed disk, go to the command view eva and see if you have any ungroupped disk or failed disk.
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
0 Kudos
Reply
Ivan Ferreira
Honored Contributor

тАО08-09-2005 01:50 AM

тАО08-09-2005 01:50 AM

Re: Error message is attached, Please help.

Using command view, going to the hardware section, you can also display the status of the power suplly/fan for the controllers and disk enclosures.
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.